Z-Cylinder
No external compression force (load) required
Not only gas spring components are used for this cylinder adjustment variation but additionally our gas spring technology. The Z-Cylinder is a combination of hydraulic adjustment cylinder and gas traction spring. The Z-Cylinder variation allows the system to be compressed without the need of external compression force (load). It can be installed in any position.
Product features:
- No external compression force required
- max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- Standard compression force: 100N
- several connecting parts
- Special Z-Cylinder designs on request
stroke |
cylinder tube length (EL2) |
diameter piston rod/ cylinder |
model |
max weight per cylinder |
speed* |
order number incl connecting parts |
|---|---|---|---|---|---|---|
150mm |
245 mm |
10/28 mm |
1 |
100 kg |
fast |
ZZ413150-A1ZW |
2 |
150 kg |
normal |
ZZ416150-A1ZW | |||
200mm |
295 mm |
10/28 mm |
1 |
100 kg |
fast |
ZZ413200-A1ZW |
2 |
150 kg |
normal |
ZZ416200-A1ZW | |||
| 300mm | 395 mm |
10/28 mm |
1 |
100 kg |
fast |
ZZ413300-A1ZW |
2 |
150 kg |
normal |
ZZ416300-A1ZW | |||
400mm |
495 mm |
10/28 mm |
1 |
100 kg |
fast |
ZZ413400-A1ZW |
2 |
150 kg |
normal |
ZA413400-A1ZW |
* dependent also on selected actuation
Model:
The pump must be selected in correspondence with the adjustment cylinder model.
- Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation:
The length is always calculated with retracted piston rod.
The complete length of the Z-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of connecting part
ELZ: length of cylinder side connecting part