E-Cylinder (not guided)
Additional guide required, small diameter
By accessing components from the Winco Easylift gas spring production, a large variety of cylinders can be offered. The E-Cylinder requires an additional guide. The E-Cylinder alone is not designed to absorb side forces.
Product features:
- max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- force per E-Cylinder required to compress: 50N
- several connecting parts
- special E-Cylinder designs on request
stroke |
cylinder tube length(EL2) |
model |
diameter piston rod/ cylinder |
max weight per cylinder |
speed* |
order number incl. connecting parts |
|---|---|---|---|---|---|---|
150mm |
190,5 mm |
1 |
10/15 mm |
100 kg |
fast |
ZE113150-EBEX |
2 |
10/18 mm |
150 kg |
normal |
ZE316150-EBEX | ||
200mm |
240,5 mm |
1 |
10/15 mm | 100 kg |
fast |
ZE113200-EBEX |
2 |
10/18 mm |
150 kg |
normal |
ZE316200-EBEX | ||
300mm |
340,5 mm |
1 |
10/15 mm |
100 kg |
fast |
ZE113300-EBEX |
2 |
10/18 mm |
150 kg |
normal |
ZE316300-EBEX | ||
400mm |
440,5 mm |
1 |
10/15 mm | 100 kg |
fast |
ZE113400-EBEX |
2 |
10/18 mm |
150 kg |
normal |
ZE316400-EBEX |
* dependent also on selected actuation
Model:
The pump must be selected in correspondence with the adjustment cylinder model.
- Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation:
The length is always calculated with retracted piston rod.
The complete length of the E-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of piston rod side connecting part
ELZ: length of cylinder side connecting part