A-Cylinder (guided cylinder)
Addition guide not required
A wide variety of A-Cylinder variations are available out of the gas spring production, guaranteeing our usual high quality. The A-Cylinder can be mounted directly on moveable part of the application. Further guiding of the A-Cylinder is not needed.
Product features:
- max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- force per A-Cylinder required to compress: 50N
- several connecting parts
- special A-Cylinder designs on request
stroke |
cylinder tube length (EL2) |
diameter piston rod/ cylinder |
model |
max weight per cylinder |
speed* |
order number incl connecting parts |
|---|---|---|---|---|---|---|
150mm | 315 mm |
22/28 mm | 1 |
100 kg | fast | ZA213150-ABAW |
2 |
150 kg |
normal |
ZA216150-ABAW | |||
200mm |
365 mm |
22/28 mm |
1 |
100 kg | fast |
ZA213200-ABAW |
2 |
150 kg |
normal |
ZA216200-ABAW | |||
| 300mm | 465 mm |
22/28 mm |
1 |
100 kg |
fast |
ZA213300-ABAW |
2 |
150 kg |
normal |
ZA216300-ABAW | |||
400mm |
565 mm |
22/28 mm |
1 |
100 kg | fast |
ZA213400-ABAW |
2 |
150 kg |
normal |
ZA216400-ABAW |
* dependent also on selected actuation
Model:
The pump must be selected in correspondence with the adjustment cylinder model.
- Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation:
The length is always calculated with retracted piston rod.
The complete length of the E-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of connecting part
ELZ: length of cylinder side connecting part